Caterpillar Bulldozer Ripper Cylinder in Virginia - We offer overnight shipping and handling on all parts and attachments for Caterpillar, Samsung, John Deere, Komatsu, and countless other common brands. Our accomplished Virginia group of parts specialists are ready to help you procure the parts you require.
Inspect a Forklift
There are more than 10,000 workplace injuries related to fork lifts occur each year, based on OSHA and HRSDC report. Many of these mishaps are caused by driver error. Lack of appropriate equipment maintenance and check causes numerous others. Maintenance and operation of a forklift is not only the reason for personal injuries, but also of property damage. Forklifts could damage building structures, overhead pipes and sprinklers, and other machines when utilized incorrectly. The following day by day check ups should be performed so as to reduce the chance of forklift accidents.
Before checking different fluid levels turn the engine off. Inspect these fluids: hydraulic oil, fuel, engine oil, brake fluid and coolant. The tires also have to be inspected for signs of wear and tear. Check the tire air pressure. Check the condition of the forks. The load backrest have to be firmly attached. Do a visual inspection of the top-clip retaining heel and pin. Next carry out an inspection of the hydraulic hoses, mast chains, stops and cables. Make certain that the overhead and finger guards are attached firmly.
LP forklifts have propane tanks that have to be inspected for indications of damage, rust or corrosion. Test the battery's charge and electrolyte levels. All belts should be checked for wear. Check to make sure the owner's manual is kept on-board the forklift inside a storage compartment. Check the seat belt to make sure the latches are secure. Test the hood latch to make certain that it is working as it should.
To make certain there are no unusual engine sounds, start the engine up and listen for any irregularities. If there are, investigate immediately. Test the accelerator and the steering controls. The parking break and the service break must be properly functioning.
To ensure proper functioning in both forward and reverse, the drive control and tilt control must be checked. The functioning of the hoist, the lowering control and attachment control needs periodic checking. Check the horn and lights. Then check the wipers, heater and defroster to make sure they are working smoothly. Inspect each gauge to find out that it is reading within functional limits.
How to Replace Forklift Tires
Regular forklift maintenance includes checking tires and replacing worn or damaged tires. Various kinds of forklifts are designed to be utilized with specific kinds of tires: solid, pneumatic or polyurethane. Tire kinds vary depending on things like the weight of the load, ground surfaces and duration and frequency of use. To change a forklift tire you will need the following tools: spare tires, forklift jack and tire press. Replacing your forklift tires occasionally is vital to help prolong the life of the machine.
Instructions
1 Methodically check the tires for indications of wear and damage. Make sure that the kind of tire on the forklift is the right kind. If the wear on the tire is over 40 percent, the tire should be replaced.
2 You must purchase spare or replacement tires.
3 After you have positioned the jack under the tire, slowly lift the forklift high enough that would enable you to easily remove the tires.
4 To be able to separate the rim from the tire, utilize the tire press and take out the old tire. Replace the tire with the new one and firmly secure. Lower the forklift, then move the jack to the next tire and do the same thing with the other damaged tire.
5 A damaged tire can be fixed on site by a local repair company. If this is your first call, the repair company could provide an estimate fro free. If the tires are very large, you would need a stationary tire press. In that case, you will need to take out the tire and bring it to a repair shop.
