Caterpillar Excavator Final Drive in Virginia - No matter if you're attempting to find stick cylinders, swing bearings, idlers, undercarriages, or another part for your equipment, our Virginia staff can assist. We have access to an abundance of dealers across the country and can easily source your entire used and new equipment needs.
Kalmar produces both 4x4 and 4x2 terminal tractors in addition to specialized tractors which are usually utilized in ports and terminals. The Kalmar 4x4 Model is amongst the most popular machines of the company. The terminal tractors could be modified in an easy way in order to suit the different requirements of handling loads in port and terminal locations.
Terminal tractors can handle roll trailers with goosenecks, semitrailers and even terminal trailers for containers. For RoRo handling, Kalmar heavy duty tractors offer a high tractive effort so that they could easily climb steep rams and can perform tight turns on slippery decks.
Kalmar's powerful 4WD terminal tractor is suitable for heavy roll-off and roll-on industrial handling and applications. This tractor could be utilized as a heavy-pulling tractor in MTS-applications too.
Lift Trucks
Kalmar provides a variety of lift trucks to help you achieve whatever particular work applications you need to tackle. These machinery are tough enough to take on any of your demands regardless of which part of the handling chain you are involved with. The Kalmar brands are synonymous with extreme quality, reliability, an efficient driving environment and ease of service. The company offers a wide array of well-proven solutions and continually strives to provide the lowest possible lifetime cost overall.
Empty Container Handlers
Empty container handlers carry out an extremely fast-paced job as containers have to be stacked or transported efficiently and fast. To be able to broaden the available land area to the fullest, the containers must be stacked close together and high up.
Critical factors in why land area would get more valuable over time is that a minimum amount of ground space and high stacking capacity. Kalmar fulfills all types of conditions, providing efficient and fast stacking even in minimal ground areas. The 2 empty container truck ranges comprise the Kalmar straight mast empty container handlers and the Kalmar empty reach stackers.
The forklift is one of the most commonly used and effective equipment seen operating in businesses and construction sites. This heavy industrial equipment is capable of carrying or lifting heavy loads and making work around the site happen efficiently and easily. There is particular training needed in order for the machines to be able to be used in a safe way. This training is well regulated and operators must acquire proper certification in order to be able to utilize the equipment legally.
Since a fork truck has a really different center of balance from most other vehicles, it takes some getting used to while driving. The center of gravity could change depending on the weight and size of the load being carried. These equipment are steered from the rear wheels. At first, this makes the model a bit difficult to operate. The majority of businesses are required to have training classes in order to teach safety guidelines and operation for this machine.
Operator safety guidelines for forklifts would always begin with a visual check of the tires, the forks, the hydraulics and the overhead guard. While walking around the machine, check for any leaking fluid before getting in is also a good idea. The safety bars are used for climbing into the machinery in a supported way. Once the seatbelt has been fastened and all the lights, horn, alarms and gauges have been inspected and the mirrors adjusted if necessary, the equipment is ready to be fired up and used for the length of its shift.
The truck should also be inspected while moving a low speeds should also be concerned with watching out for any pedestrians. Slow down more when you come to a turn and begin turning the steering smoothly to prevent a possible tip over. If the equipment does start to tip over, be sure never to try and jump out of the lift since you could likely end up being trampled by the equipment. The fact is, you will be better off and safer to go through a roll over situation strapped safely inside of the machinery.
